Current project I'm working on.
Tuesday, January 28, 2014
Sunday, January 16, 2011
Wednesday, January 12, 2011
Friday, April 17, 2009
Sunday, February 8, 2009
Bandsaw Box Part 1
Bandsaw Box Part 1, "Airborne" template from the book by Lois Keener Ventura. Making the cuts with the bandsaw and short sanding segment.
Saturday, February 7, 2009
Wednesday, January 21, 2009
Tuesday, December 16, 2008
Friday, December 12, 2008
Base Cabinets Part 3
- 00:00 Pocket Holes in the carcass to attach face-frames.
- 03:00 Sanding front of carcass.
- 04:05 Attaching face-frame to carcass.
- 08:08 Discuss face-frame measurements and trim tabs.
- 10:45 Routing the face-frame on a finished end cabinet.
- 12:00 Drawer slide stand-offs.
- 17:25 Attaching slide stand-offs and slides.
- 19:23 Blumotion slides
- 21:35 Full extension slides.
- 22:53 Drawer mounting with Blumotion slides.
Thursday, December 11, 2008
Base Cabinets Part 2
- 00:00 Making Face-Frames.
- 08:00 Buckling face-frames together for sanding.
- 12:47 Blumotion soft close pistons.
- 16:14 Delta Air Cleaner (personal opinion -- it is for smaller shops)
Base Cabinets Part 1
- 00:00 Sizes and milling the cabinet sides.
- 01:54 shelf pin jigs.
- 03:18 NOTE: I incorrectly stated cabinet side height at 39-3/4", meant to say 29-3/4"
- 03:57 Milling the bottom.
- 05:56 Attaching sides to bottom.
- 11:23 Attaching the upper cross members.
- 14:55 Attaching the back.
- 17:45 Showing trim tabs on back of carcass.
Subscribe to:
Posts (Atom)